Make your own Test leads Evaluation

 

Make your own Test Leads evaluation and compare the exiting test clips

on the 6 important criteria, 3 Hands-on criteria and 3 Hands-off criteria

Download and fill up the flowing table with test clips for Test leads evaluation

ClipsTableToFill

Test Leads evaluation for the exiting test clips on the 6 important criteria, 3 Hands-on criteria and 3 Hands-off criteria.

– Questions to be answered:

1) Direct point measurement comfort and accessibility

a) Is comfortable to  you keep the test probe in your hand ?
b) Is possible to point the test probe to a measuring point  ?

2) Direct point contact resistance

a) How sharp is the tip of the test clip or test probe ?
b) How is Is the test clip connected to the leads : x)  solder, y) through the walls of the clip ( as at the 2 hooks clip )  z) trough the banana plug

3) Signal operator insulation

a) What voltage can be tested if you keep the test probe or clip in your hand ( HANDS – ON ) . Actual standard : IEC 61010
b) What is the between your fingers and the tip of the probe.  ( the 2 hook clip keeps your finger far from te test point so is difficult to probe )

4) Connection reliability  : Mechanical and at high temperature.

a) is the connection made between 1 metal part and one plastic part ( as at the one hook clip ) , or between 2 metal parts ?

5) Connection resistance

a) is the connection made between 1 metal part and one plastic part ( as at the one hook clip ) , or between 2 metal parts ?
b) How is Is the test clip connected to the leads : x)  solder, y) through the walls of the clip ( as at the 2 hooks clip )  z) trough the banana plug

6) Connection comfort and accessibility in narrow places

a) How sharp is the tip of the test clip or test probe ?
b) how easy is to perform the connection

 

You can check our evaluation at : http://parrot-invent.com/test-clips-comparison/